Adjustable Levelers - Chair Levelers

PHONE	888-320-7557	FAX	888-320-7558
	815-254-2313		815-254-2499
Email: sales@superior-components.com Click HERE to Request a Quote or to contact us for more information.

Table of Contents

Adjustable Levelers

Shown below are:

Steel Base Adjustable Glides

Hex Base All Zinc Plated Steel Levelers

Heavy Duty Adjustable Swivel Steel Levelers

Click HERE to go back to the top.

STEEL BASE ADJUSTABLE GLIDES

Styles:
A: CUSHIONED BASE STYLE NICKEL PLATED STEEL W/BLACK VINYL/PLASTIC CUSHION	B: HEAVY DUTY ZINC PLATED STEEL CUSHIONED WITH COVER SHELL	C: LOW SILHOUETTE SWIVEL GLIDE NICKEL PLATED STEEL	D: KENT SWIVEL ZINC PLATED STEEL CARRIAGE BOLT ENCAPSULATED IN BASE	E: ELEVATOR BOLT

PART NUMBER STYLE SIZE AND STUD LENGTH IN INCHES BASE DIAMETER IN INCHES APPROX. SHIPPING WEIGHT IN LBS PER 1000 PCS

9905 A* RUBBER PLUG TO FIT A 5/8 HOLE 15/16 STAINLESS STEEL 28

7501-X A 8/32 X 3/8 WITH LOCKING NUT 1-1/16 39

7501-1 A 8/32 x 1/2 WITH LOCKING NUT 1-1/16 27

7500-4-NC-3 A 1/4-20 X 1/4 WITHOUT CUSHION 1-1/16 31

7505-4-1 A 1/4-20 X 1/2 7/8 25

7506-4-1 A 1/4-20 X 1/2 1-1/4 38

7505-4-3/4-1 A 1/4-20 X 3/4 7/8 28

7513-4-3 A 1/4-20 x 3/4 1-1/16 38

7507-4-1 A 1/4-20 X 1 7/8 29

7507-4-24 A 1/4-20 X 1 29/32 34

7503-4-1 A 1/4-20 X 1 1-1/16 38

7504-4-1 A 1/4-20 X 1 1-1/4 43

7504-4 A 1/4-20 X 1-1/8 1-1/4 58

7504-4-BP-1 A 1/4-20 X 1 1-1/4 BRASS PLATED BASE 43

7515-4-3 A 1/4-20 x 1 1-1/2 62

7701-1 C 1/4-20 x 1 1-1/4 51

7705-4 C 1/4-20 X 1 1-1/4 SIERRA STYLE BASE 52

7500-4-ZP E 1/4-20 X 1 1 26

7508-4-3 A 1/4-20 X 1-1/2 7/8 36

7516-4-3 A 1/4-20 X 1-1/2 1-1/2 68

7501-5-3 A 5/16-18 X 1/2 1-1/16 48

7506-5-3 A 5/16-18 X 1/2 1-1/4 52

7507-5-1 A 5/16-18 X 1 7/8 39

7502-5-1 A 5/16-18 X 1 1-1/16 50

7504-5-1 A 5/16-18 X 1 1-1/4 53

7504-5 A 5/16-18 X 1-1/8 1-1/4 71

6746 A 5/16-18 X 1 1-1/4 SAMSON STYLE 65

7702-5-1 C 5/16-18 X 1 1-1/4 NON-SWIVEL 55

7509-5-3 A 5-16-18 x 1-1/2 1-1/4 68

9600-3 D 5/16-18 x 1-1/2 1-3/4 91

7504-6-1 A 3/8-16 X 1 1-1/4 65

7504-6 A 3/8-16 X 1 1-1/4 83

9606-3 D 3/8-16 X 1 1-3/4 92

9601-7 D 3/8-16 X 1-1/4 1-3/4 103

7516-AM-6-3 B 3/8-16 X 1-1/2 1-1/2 100

7518-6-AM-3 B 3/8-16 X 1-1/2 2 173

9603-3 D 3/8-16 X 2 1-3/4 115

7516-AM-7-15 B 7/16-14 X 1-1/2 1-9/16 170

7710 C 7/16 X 1 FRICTION RING STEM 1-9/16 112

7515-3 A 7/16 X 1-1/4 FRICTION RING STEM 1-1/2 115

7516-AM-716SS-15 B 7/16 X 1-29/32 STRAIGHT STEM 1-9/16 190

PART NUMBER	STYLE	SIZE AND STUD LENGTH IN INCHES	BASE DIAMETER IN INCHES	APPROX. SHIPPING WEIGHT IN LBS PER 1000 PCS
9905	A*	RUBBER PLUG TO FIT A 5/8 HOLE	15/16 STAINLESS STEEL	28
7501-X	A	8/32 X 3/8 WITH LOCKING NUT	1-1/16	39
7501-1	A	8/32 x 1/2 WITH LOCKING NUT	1-1/16	27
7500-4-NC-3	A	1/4-20 X 1/4 WITHOUT CUSHION	1-1/16	31
7505-4-1	A	1/4-20 X 1/2	7/8	25
7506-4-1	A	1/4-20 X 1/2	1-1/4	38
7505-4-3/4-1	A	1/4-20 X 3/4	7/8	28
7513-4-3	A	1/4-20 x 3/4	1-1/16	38
7507-4-1	A	1/4-20 X 1	7/8	29
7507-4-24	A	1/4-20 X 1	29/32	34
7503-4-1	A	1/4-20 X 1	1-1/16	38
7504-4-1	A	1/4-20 X 1	1-1/4	43
7504-4	A	1/4-20 X 1-1/8	1-1/4	58
7504-4-BP-1	A	1/4-20 X 1	1-1/4 BRASS PLATED BASE	43
7515-4-3	A	1/4-20 x 1	1-1/2	62
7701-1	C	1/4-20 x 1	1-1/4	51
7705-4	C	1/4-20 X 1	1-1/4 SIERRA STYLE BASE	52
7500-4-ZP	E	1/4-20 X 1	1	26
7508-4-3	A	1/4-20 X 1-1/2	7/8	36
7516-4-3	A	1/4-20 X 1-1/2	1-1/2	68
7501-5-3	A	5/16-18 X 1/2	1-1/16	48
7506-5-3	A	5/16-18 X 1/2	1-1/4	52
7507-5-1	A	5/16-18 X 1	7/8	39
7502-5-1	A	5/16-18 X 1	1-1/16	50
7504-5-1	A	5/16-18 X 1	1-1/4	53
7504-5	A	5/16-18 X 1-1/8	1-1/4	71
6746	A	5/16-18 X 1	1-1/4 SAMSON STYLE	65
7702-5-1	C	5/16-18 X 1	1-1/4 NON-SWIVEL	55
7509-5-3	A	5-16-18 x 1-1/2	1-1/4	68
9600-3	D	5/16-18 x 1-1/2	1-3/4	91
7504-6-1	A	3/8-16 X 1	1-1/4	65
7504-6	A	3/8-16 X 1	1-1/4	83
9606-3	D	3/8-16 X 1	1-3/4	92
9601-7	D	3/8-16 X 1-1/4	1-3/4	103
7516-AM-6-3	B	3/8-16 X 1-1/2	1-1/2	100
7518-6-AM-3	B	3/8-16 X 1-1/2	2	173
9603-3	D	3/8-16 X 2	1-3/4	115
7516-AM-7-15	B	7/16-14 X 1-1/2	1-9/16	170
7710	C	7/16 X 1 FRICTION RING STEM	1-9/16	112
7515-3	A	7/16 X 1-1/4 FRICTION RING STEM	1-1/2	115
7516-AM-716SS-15	B	7/16 X 1-29/32 STRAIGHT STEM	1-9/16	190

Many other Sizes and Styles are available. Please call if you don't see what you need.

Click HERE to go back to the top.

HEX BASE ALL ZINC PLATED STEEL LEVELER

PART NUMBER STUD SIZE BASE DIAMETER ACROSS HEX FLATS IN INCHES BASE THICKNESS APPROX. SHIPPING WEIGHT IN POUNDS PER 1000 PCS

3344-4-FBZ 1/4-20 X 1-14 9/16 3/32 20

3353-5-FBZ 5/16-18 X 1 3/4 7/64 33

3355-5-FBZ 5/16-18 X 1-1/2 WITH SLOT 3/4 7/64 40

3326-5-ZP 5/16-18 X 2-1/2 1-3/8 HEX CUP 5/16 95

3365-6-FBZ 3/8-16 X 1-1/2 WITH SLOT 7/8 5/32 62

3365-6-FBZ-02 3/8-16 X 1-1/2 WITH SLOT & PART #1582-SOC-G GRAY POLY CAP ASSEMBLED TO BASE 1-1/8 ROUND 1/8 68

3324-6-ZP 3/8-16 X 1-12 1-3/8 HEX CUP 5/16 93

3366--6-FBZ 3/8-16 X 2 WITH SLOT 7/8 5/32 76

3332-6-ZP 3/8-16 X 2 1-3/8 5/64 96

3367-6-FBZ 3/8-16 X 2-1/2 WITH SLOT 7/8 5/32 87

3367-6-FBZ-02 3/8-16 X 2-1/2 W/SLOT & PART #1582-SOC-G GRAY POLY CAP ASSEMBLED TO BASE 1-1/8 ROUND 1/8 94

3369--8-FBZ 1/2-13 X 2-1/2 1-1/16 11/64 160

GRAY CAP TO FIT ON ABOVE GLIDES

1582-SOC-G A 1-1/8" OD GRAY POLYETHYLENE SNAP ON CAP TO SNAP ON 7/8" ACROSS HEX FLATS BASE ON THE ABOVE PARTS; 1/8" THICK

HEX BASE ALL ZINC PLATED STEEL LEVELER

PART NUMBER	STUD SIZE	BASE DIAMETER ACROSS HEX FLATS IN INCHES	BASE THICKNESS	APPROX. SHIPPING WEIGHT IN POUNDS PER 1000 PCS
3344-4-FBZ	1/4-20 X 1-14	9/16	3/32	20
3353-5-FBZ	5/16-18 X 1	3/4	7/64	33
3355-5-FBZ	5/16-18 X 1-1/2 WITH SLOT	3/4	7/64	40
3326-5-ZP	5/16-18 X 2-1/2	1-3/8 HEX CUP	5/16	95
3365-6-FBZ	3/8-16 X 1-1/2 WITH SLOT	7/8	5/32	62
3365-6-FBZ-02	3/8-16 X 1-1/2 WITH SLOT & PART #1582-SOC-G GRAY POLY CAP ASSEMBLED TO BASE	1-1/8 ROUND	1/8	68
3324-6-ZP	3/8-16 X 1-12	1-3/8 HEX CUP	5/16	93
3366--6-FBZ	3/8-16 X 2 WITH SLOT	7/8	5/32	76
3332-6-ZP	3/8-16 X 2	1-3/8	5/64	96
3367-6-FBZ	3/8-16 X 2-1/2 WITH SLOT	7/8	5/32	87
3367-6-FBZ-02	3/8-16 X 2-1/2 W/SLOT & PART #1582-SOC-G GRAY POLY CAP ASSEMBLED TO BASE	1-1/8 ROUND	1/8	94
3369--8-FBZ	1/2-13 X 2-1/2	1-1/16	11/64	160
GRAY CAP TO FIT ON ABOVE GLIDES

1582-SOC-G	A 1-1/8" OD GRAY POLYETHYLENE SNAP ON CAP TO SNAP ON 7/8" ACROSS HEX FLATS BASE ON THE ABOVE PARTS; 1/8" THICK

Click HERE to go back to the top.

HEAVY DUTY ADJUSTABLE SWIVEL STEEL LEVELERS
These levelers swivel to 10 degrees. Standard finish is yellow zinc. Nickel plating and black oxide finishes are also available. Same parts available with metric thread, stainless steel, non-skid and plastic Delrin bases. Other heavy duty levelers, low profile steel and glass filled nylon with lag holes are also available. Please Inquire

To insure proper leveling mount size for you application, divide the weight of the machine by the number of machine feet. This will equal the pounds or load per foot.

SWIVEL BASE FOOT, FEMALE

STEEL WITHOUT BOLT

Model A B C D Static Load Rating in Pounds

TSW 00 10-32 3/4" 17/32" 3/8" 700

TSW 0 1/4-20 1 45/64 1/2 1000

TSW 1 3/8-16 1-1/4 7/8 5/8 3750

TSW 2 1/2-13 1-7/8 1-1/8 3/4 5000

TSW 3 5/8-11 2-1/2 1-1/4 7/8 6000

TSW 4 3/4-10 3 1-1/2 1-1/16 7400

TSW 5 1"-8 4 1-7/8 1-3/8 20,000

TSW 6 1-1/4 -11 6 2-3/4 1-7/8 43,000

NON-SKID WITHOUT BOLT

Model A B C D Static Load Rating in Pounds

NTS 00 10-32 3/4" 17/32" 3/8" 700

NTS 0 1/4-20 1 45/64 1/2 1000

NTS 1 3/8-16 1-1/4 7/8 5/8 3750

NTS 2 1/2-13 1-7/8 1-1/8 3/4 5000

NTS 3 5/8-11 2-1/2 1-1/4 7/8 6000

NTS 4 3/4-10 3 1-1/2 1-1/16 7400

NTS 5 1"-8 4 1-7/8 1-3/8 20,000

NTS 6 1-1/4 -7 6 1-7/8 1-7/8 43,000

SWIVEL BASE FOOT, FEMALE

STEEL WITHOUT BOLT
Model	A	B	C	D	Static Load Rating in Pounds
TSW 00	10-32	3/4"	17/32"	3/8"	700
TSW 0	1/4-20	1	45/64	1/2	1000
TSW 1	3/8-16	1-1/4	7/8	5/8	3750
TSW 2	1/2-13	1-7/8	1-1/8	3/4	5000
TSW 3	5/8-11	2-1/2	1-1/4	7/8	6000
TSW 4	3/4-10	3	1-1/2	1-1/16	7400
TSW 5	1"-8	4	1-7/8	1-3/8	20,000
TSW 6	1-1/4 -11	6	2-3/4	1-7/8	43,000
NON-SKID WITHOUT BOLT
Model	A	B	C	D	Static Load Rating in Pounds
NTS 00	10-32	3/4"	17/32"	3/8"	700
NTS 0	1/4-20	1	45/64	1/2	1000
NTS 1	3/8-16	1-1/4	7/8	5/8	3750
NTS 2	1/2-13	1-7/8	1-1/8	3/4	5000
NTS 3	5/8-11	2-1/2	1-1/4	7/8	6000
NTS 4	3/4-10	3	1-1/2	1-1/16	7400
NTS 5	1"-8	4	1-7/8	1-3/8	20,000
NTS 6	1-1/4 -7	6	1-7/8	1-7/8	43,000

SWIVEL BASE FOOT WITH BOLT AND JAM NUT

STEEL WITH BOLT

Model A B C D E Static Load Rating in Pounds

BSW 00 10-32 3/4" 1-17/32" 3/8" 1" 700

BSW 0 1/4-20 1 1-61/64 1/2 1-1/4" 1000

BSW 1 3/8-16 1-1/4 2-7/8 5/8 2 3750

BSW 2 1/2-13 1-7/8 3-1/8 3/4 2 5000

BSW 3 5/8-11 2-1/2 3-1/4 7/8 2 6000

BSW 4 3/4-10 3 3-1/2 1-1/16 2 7400

BSW 5 1"-8 4 5-3/8 1-3/8 3-1/2 20,000

BSW 5EL 1"-8 4 6-1/8 1-3/8 4-1/4 20,000

BSW 6 1-1/4 -7 6 6-3/4 1-7/8 4 43,000

BSE 6EL 1-1/4 -7 6 8-3/4 1-7/8 6 43,000

NON-SKID WITH BOLT

Model A B C D E Static Load Rating in Pounds

NSW 00 10-32 3/4" 1-17/32" 3/8" 1" 700

NSW 0 1/4-20 1 1-61/64 1/2 1-1/4" 1000

NSW 1 3/8-16 1-1/4 2-7/8 5/8 2 3750

NSW 2 1/2-13 1-7/8 3-1/8 3/4 2 5000

NSW 3 5/8-11 2-1/2 3-1/4 7/8 2 6000

NSW 4 3/4-10 3 3-1/2 1-1/16 2 7400

NSW 5 1"-8 4 5-3/8 1-3/8 3-1/2 20,000

NSW 5EL 1"-8 4 6-1/8 1-3/8 4-1/4 20,000

NSW 6 1-1/4 -7 6 6-3/4 1-7/8 4 43,000

NSE 6EL 1-1/4 -7 6 8-3/4 1-7/8 6 43,000

SWIVEL BASE FOOT WITH BOLT AND JAM NUT

STEEL WITH BOLT
Model	A	B	C	D	E	Static Load Rating in Pounds
BSW 00	10-32	3/4"	1-17/32"	3/8"	1"	700
BSW 0	1/4-20	1	1-61/64	1/2	1-1/4"	1000
BSW 1	3/8-16	1-1/4	2-7/8	5/8	2	3750
BSW 2	1/2-13	1-7/8	3-1/8	3/4	2	5000
BSW 3	5/8-11	2-1/2	3-1/4	7/8	2	6000
BSW 4	3/4-10	3	3-1/2	1-1/16	2	7400
BSW 5	1"-8	4	5-3/8	1-3/8	3-1/2	20,000
BSW 5EL	1"-8	4	6-1/8	1-3/8	4-1/4	20,000
BSW 6	1-1/4 -7	6	6-3/4	1-7/8	4	43,000
BSE 6EL	1-1/4 -7	6	8-3/4	1-7/8	6	43,000
NON-SKID WITH BOLT
Model	A	B	C	D	E	Static Load Rating in Pounds
NSW 00	10-32	3/4"	1-17/32"	3/8"	1"	700
NSW 0	1/4-20	1	1-61/64	1/2	1-1/4"	1000
NSW 1	3/8-16	1-1/4	2-7/8	5/8	2	3750
NSW 2	1/2-13	1-7/8	3-1/8	3/4	2	5000
NSW 3	5/8-11	2-1/2	3-1/4	7/8	2	6000
NSW 4	3/4-10	3	3-1/2	1-1/16	2	7400
NSW 5	1"-8	4	5-3/8	1-3/8	3-1/2	20,000
NSW 5EL	1"-8	4	6-1/8	1-3/8	4-1/4	20,000
NSW 6	1-1/4 -7	6	6-3/4	1-7/8	4	43,000
NSE 6EL	1-1/4 -7	6	8-3/4	1-7/8	6	43,000